110V 300W 200℃ Hot Air G un Heat Shrinkable Sheet Setting Tool Rubber Stamp DIY Tool Thermal Blower US Plug
Features:
Can be used to heating relief powder and shrinkable sheet.
Keeping 3-5cm distance from work and about a 45 degree angle to heat until it is completed.
After completion, use the heat g un at high temperature to blow a few seconds.
It not only can add its hardness, but also its brightness.
The temperature can not adjustable, in theory, it can reach at 200 degree within a few seconds.
Do not work over 10 minutes, blow at 45 degree angle to avoid heat suck.
Be careful when using the hot air g un.
Specification:
Color: Black+Black Pink+White White+Black White+White Red+Red White+Blue Blue+Black Blue+Red Green+Green
Material: ABS
Type: Constant temperature
Working temperature: It can reach at about 200°C / 390°F within a few seconds
Rated power: 300W
Power type: AC power supply
Rated voltage: 110V
Power: 50Hz
Working time: 8 minutes
Usage:
1. Plug in the heat tool.
2. Hold the g un but do not touch the hot nozzle.
3. Keep 5-6cm distance between the heat g un and your work, about 45° for heating until the completion of the work.
4. Turn off the power to stay cool.
Notes:
1. This kind of g un can not adjust the temperature but it heats up quickly at about 200℃ theoretically.
Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion.
2. This heat g un is not a High Power one due to its 300W low power. But it is great for heating shrinkable film, embossed powder, rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the g un.
Package included:
1 x Hot Air G un
Detail Pictures:
Detail Pictures:
110V 300W 200℃ Hot Air G un Heat Shrinkable Sheet Setting Tool Rubber Stamp DIY Tool Thermal Blower US Plug See detail
