42cm Dent Puller Slide Hammer T Bar for Car Paintless Dent Removal Hail Repair
Descriptions:
42cm Car Dent Puller Slide Hammer T Bar for Paintless Dent Removal Hail Repair
Specifications:
Hammer Lifter Repair Tool
Material: Stainless steel
Color: Silver
Length: 42.0cm
Width: 12.0cm
Glue Pulling Tabs
Material: Plastic
Color: Blue,Red
Blue Glue Pulling Tabs size: 40mm,35mm,32mm,25mm,19mm,15mm
Red Glue Pulling Tabs size: 48mm,40mm,32mm,31mm,24mm,8mm
Features:
- Stainless Steel Adjustment knob.
- Come with 12 different sizes puller tabs.
- Designed to repair auto body small damage easily by manual operation.
- It is environmental protection and does not damage the original paint.
How to use the repair kits
1.Clean the dent with a clean wet cloth.
2.Mount the glue stick into the glue guns,pull the trigger to let the glue stick enter into the glue guns, connect the power source and preheat for 5 minutes.
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the
drawing gasket is, the larger the drawing force is).
4.Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue).
5.Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter).
6.Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent.
7.Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen.
8.Clean the repaired place with a clean wet cloth.
Package Included:
1 Pc x 2 In 1 Dent Removel T Bar Tools
12 Pcs x Glue Pulling Tabs
More Details:
42cm Dent Puller Slide Hammer T Bar for Car Paintless Dent Removal Hail RepairSee detail
