40/50/100Pcs Tile Leveling System Floor Kit Alignment Clip Reusable Spacers Locator W/ Wrench
Description:
40/50/100Pcs Tile Leveling System Floor Kit Alignment Clip Reusable Spacers Locator W/ Wrench
Specification:
Material: High Quality PP + Stainless Steel
Color: Black+Orange
Applicable Brick Difference: >1.5mm
Applicable Tile Thickness: 5-16mm
Features:
1. Wear-resistant, recyclable, reusable.
2. Easy to use in DIY operation.
3. Balance tiles in the same horizontal position.
4. Improve tile installation speed.
5. Reduce installer fatigue / pressure.
6. There is virtually no crackless, flat surface.
7. This reduces the need for sharpening and polishing.
8. Avoid shingles from movement during solidification.
Usage Tips:
Lay the first tile, leaving more than 2mm. Close to tile.
Insert T-pins next to the gap between the tiles. Then rotate 90 degrees and the T-needle is attached to the bottom of the two tiles. Adjust the cover by hand / wrench until the two tiles are on the same level.
After leveling for about 5-6 hours, before the cement / adhesive is completely dry, rotate the lid in reverse and take off the 180 degree T needle.
Avoid not removing the T-leveling tile system:
1. Ceramic tile joints are 2mm or more (cross joints are recommended)
2. When leveling, adhesive cement or tile cement around T-type leveler should be cleaned.
3. Remove the T-type straightener about 5-6 hours after leveling before the tile or cement binder is completely dried.
Package Included:
40/50/100 x Tile Leveling System Floor Kit (Optional)
1/2 x Wrench
More Details:
40/50/100Pcs Tile Leveling System Floor Kit Alignment Clip Reusable Spacers Locator W/ WrenchSee detail
